Solutions for your safety

Type: REF16-S

Description

It provides selective protection for all DC 24 V load circuits at a width of only 12.5 mm. This is achieved by a combination of active electronic current limitation in the event of a short circuit and overload disconnection at typically 1.25 times rated current. Plugged into an E-T-A socket, which is available with screw terminals or screwless terminals, the REF16-S provides ease of installation. The sockets allow power distribution and signalling via plug-in type jumpers. In addition the REF16-S latches on when plugged into the socket and by means of coding pins a clear assignment to current ratings or slots is possible. Dimensions are in compliance with the standard DIN 43880 for the installation of built-in units.

Technical Data

Voltage rating DC 24 V (18...30 V)
Voltage rating
Rated voltage 0.5 A
1 A
2 A
3 A
4 A
6 A
8 A
10 A
Number of poles 1-pole
Current limitation typically 1.25 x IN
Signal output potential-free signal contact max. DC 30 V / 0.5 A, min. 10 V / 10 mA (make or break contact), Plus-switching signal output (+ 24 V))
Status indication 1 LED green/orange/red: status/fault
Temperature range
Terminal design blade terminals 6.3 mm
Mounting method on socket 80/81plus
Certificates CE-logo

Accessories

Accessories

Order number Description
80PLUS-PT01 socket 80plus
81PLUS-UT01 socket 81plus
Y 310 624 01 Busbar, red, 2 poles
Y 310 625 01 Busbar, red, 4 poles
Y 308 823 11 Busbar, red, 10 poles
Y 310 624 02 Busbar, blue, 2 poles
Y 310 625 02 Busbar, blue, 4 poles
Y 308 823 12 Busbar, blue, 10 poles
Y 310 624 03 Busbar, grey, 2 poles
Y 308 823 13 Busbar, grey, 10 poles
Y 310 626 01 coding star, red, 4 coding pins
X 222 977 50 label

Applications

Applications

  • Automation
  • Automation & Process Control
  • Automotive Manufacturing
  • Chemical, Oil & Gas
  • Pharmaceutical & Food
  • Power Engineering DC 24 V

Downloads