Solutions for your safety

Type: Flexible Power-D-Box® with pcb for 3600/2210/
ESS20/ESX10

Description

~ 483 mm

The compact 2U 19inch Power-D-Box® with sockets pre-wired on printed circuit board features aluminium profiled cross members with an anoodized front plate. The panel cutout accommodates up to 30 positions numbered 1 through 30. It is possible to have 6, 12, 18, 24 or 30 prepared slots or to have a redundant distribution with up to 2 x 15 positions.

The Power-D-Box® accommodates plug-in type circuit breakers 3600/ 3900 and 2210, solid state remote power controller E-1048-700, electronic circuit breaker type ESS20 and electronic circuit protector ESX10. The required device must be specified in the ordering information as both different installation depth and pcb pin assignments must be allowed for.

The devices are plugged into corresponding sockets type 63-P10-Si (6 positions each). These sockets are soldered from the rear onto the pcb, holding a certain pre-wiring.

Downloads

Technical Data

Technical Data

Dimensions 
  • width 19 (482.6 mm) 
  • height 2U (88.9 mm) 
  • installation depth 205 mm 
  • installation depth 250 mm 
Max. rated voltage 
  • DC +65 V 
  • AC 250 V 
Number of ways 
  • 2 x 14 redundant 
  • 2 x 15 redundant 
  • 1 x 30 non-redundant 
  • 1-pole protected 
  • 2-pole protected 
For circuit breaker type 
  • 2210 1-pole 
  • 2210 2-pole 
  • 3600/3900 
  • ESS20 
Supply 
  • redundant 
  • non-redundant 
Supply terminal type 
  • Screw terminals 
  • Terminal studs (for cable lugs)  
  • M6 
Max. current rating of loads 
  • 16 A
Terminal type of loads  
  • Screw terminals 
  • 2.5 mm² 
Signalling 
  • Make contacts connected in series 
  • Break contacts connected in parallel 
Terminal type of auxiliary contacts 
  • 2.5 mm² 
Operating temperature range 
  • 0 … +50 °C 
Further technical data   are available upon request 
Mounting method 
  • racks 
Circuit breaker type 
  • thermal-magnetic 
  • hydraulic-magnetic 
  • electronics 

Accessories

Accessories

Order numberDescription
X 222 066 01jumper
Y 308 563 01blanking piece 3600/3900; 2210
Y 308 563 41blanking piece ESS20, ESX10
Y 308 602 01withdrawal tool

Applications

Applications

  • Chemical, Oil & Gas 
  • Power Engineering DC 24 V 
  • Telecom & Datacom 
  • Power-D-Box-Systems 
  • Automation